REMCON ASSOCIATES, LLC
USED PORTABLE erie strayer mcg-11t DRY BATCH PLANT
Mobile gen sets available for sale or rent
PORTABLE ERIE STRAYER MCG11T Dry Batch Plant (200 yd/hr)
- 80 yd 4 Compartment Aggregate bin radial stacker fed
- 30" Batch Transfer Belt
- 12 Yd Agg/Cement Scales
- 600 bbl split silo w/C&W LPR8 Filter Vent Collectors
- C&W CP-5000M Mobile Truck Dust Collector w/dust ducting and shroud
- Water by Meter
- Compressor with refrigerated dryer
- Command Alkon Control System
- 30" x 80' Portable Radial Stacker with integral front end loader hopper w/remote control
- Still erected and operational for demonstration. We will continue to operate until it is sold.
Ready to batch concrete now. Quick plant to get into your job site and get batching right away.
CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
Engine Drive
Air Vantage® 566X Hydraulic (Deutz®) K4343-4
Excellent, all-around welder/generator with integrated 60 cfm air compressor and 14 gpm hydraulic
pump. Capable of up to 600 amps of DC multi-process welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Powered by a 65.7 hp Deutz® TD2.9L4 diesel engine and features patented Chopper Technology® and CrossLinc® Technology.
The Air Vantage® 566X Hydraulic is the ultimate utility machine. This versatile and powerful
machine boasts a 575 amp welder, 20 kW generator, 60 cfm air compressor, and 14 gpm hydraulic pump to combine as a truly epic 4-in-1 workhorse. Suited for the most challenging job sites, the rugged Air Vantage 566X Hydraulic can handle a wide array of unique tasks from heavy-duty carbon arc gouging, powering industrial tools, or running a hydraulic crane. Now better than over, the machine features CrossLinc® Technology to provide welders with greater control at the arc to help improve safety, productivity, and quality. Select this multifunctional workhorse for your next job!
Features
The Ultimate Utility Machine – Offers up to 600 amps (IEC rated at 525 amps) of welding current to
tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC- Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods.
Generator Output – Provides up to 20 kW of continuous three-phase power to run industrial tools
such as plasma cutters, pumps, or inverter welders. Integrated Air Compressor with Built-In Rope Heater – 60 cfm @ 100 psi of compressed air powered by VMAC®
Built-in Hydraulic Pump – 14 gpm @ 3000 psi
Patented Chopper® Technology – Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal. Expanded Welding Capabilities – Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds.
CrossLinc® Enabled – Allows communication through a standard weld cable to enable voltage or
current control at the arc without a control cable to help improve safety, quality, and
productivity with less trips to the power source and reduced jobsite clutter. Built-in True Voltage
Technology™ (TVT) compensates for voltage drop to further improve operations.
Reliable Operations – Engineered tough and field proven for ruggedness and durability to meet the
most challenging job site needs and harshest environments.
Industrial Diesel Engine – Powered by a 65.7 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance.
What's Included
Machine Only
Specifications
Product Weights & Dimensions
Dimensions (H x W x D) 42 in x 32.9 in x 69 in (1067 mm x 836 mm x 1753 mm)
Net Weight 1800 lbs (816 kg)
Machines Processes Stick (SMAW)
Gouging (CAC-A) TIG (GTAW)
MIG (GMAW)
Pulsed MIG (GMAW-P)
Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) Submerged Arc (SAW)
IEC Rating 525A / 41V / 100% @ 104°F (40°C)
Max Rating 600A / 40V / 60% @ 104°F (40°C)
600 Amps
(CC): 40 –350 Amps
Touch Start TIG: 20 – 350 Amps CV-Wire: 10 – 45 Volts
Arc Gouging: 60 – 600 Amps
Open Circuit Voltage 66 Peak OCV @ 1800 RPM
Air Vantage® 566X Hydraulic (Deutz®)
Rated Gouging Carbon Diameter 3/8" (9.5 mm)
Machines Communication Technology CrossLinc ArcLink
Engine Driven Welders
Single Phase Auxiliary Output 12,000 Watts Continuous, 120/240V
Three Phase Auxiliary Output 20,000 Watts Continuous, 240V
Auxiliary Output Frequency 60 Hz
Receptacle Types NEMA 5-20R
NEMA 14-50R NEMA 15-50R
Engine Brand & Model Deutz® TD2.9L4
Engine Description 4 Cylinder Turbocharged Water Cooled Diesel Engine
Engine Horsepower 65.7 hp (49.0 kW)
Engine Block Size & Displacement 178 cu. in. (2.9 L)
Bore x Stroke - 3.62 in x 4.33 in (92 mm x 110 mm)
Emissions Rating US EPA Tier 4 Final
High Idle Operating Speed @ Rated Output 1800
Low Idle Operating Speed 1525
Fuel Tank Size (US gal.) 25 US gal.
Fuel Tank Size (L) 94.6 L
Oil Capacity (qts.) 9.0 qts.
Oil Capacity (L) 8.5 L
Coolant Capacity (L) 9.5 L
Air Compressor Brand/Model VMAC® S700162
Air Compressor Description Belt
Rotary Screw
Air Compressor Output 60 cfm @ 100 psi (1.7 cmm @ 6.9 bar)
Air Compressor Max System Pressure 150 psi (10.3 bar)
Air Compressor Protections Safety Relief Valve High Temp Shutdown
Air Compressor Oil Capacity (US gal.) 1.1 US gal.
Air Compressor Oil Capacity (L) 4.0 L
Hydraulic Pump Brand/Model Marzocchi® GHP2A
Hydraulic Pump Description Cast Iron Gear Belt-Driven with 12 Volt Electro-clutch
Hydraulic Output (High Idle) 14 gal/min @ 3000 psi (53 L/min @ 20.7 Mpa)
Hydraulic Pump Fitting (Inlet) SAE16, 37° JIC Male Flare
Hydraulic Pump Fitting (Outlet) SAE10, 37° JIC Male Flare
Application
Typical Application
Construction Mining Railroad Maintenance Construction & Field Erection Maintenance & Repair Offshore Oil & Gas Power Generation Shipbuilding Structural Fabrication Structural Welding
Warranty
3 Years Parts and Labor - Engine warranted separately by engine manufacturer. Compressor warranted separately by compressor manufacturer
.
- CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
ERIE STRAYER MP-11T&C Wet & Dry Batch Plant (300 yd/hr)
- 215 yd 3 Compartment Aggregate with two bin loading conveyors with flop chutes
- 12 Yd Agg/Cement Scale
- 935 bbl silo / 715 bbl aux silo
- 36" Batch trasnfer conveyor
- 12 cu yd Erie Tilt Mixer w/polyurethane liners in drum and blades / concrete directional chute for mixer trucks
- C&W Central Dust Collector
- Water by Meter w/holding tank
- Compressor with refrigerated dryer
- Command Alkon Control System
- Still erected and operational for demonstration. We will continue to operate until it is sold.
- CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
NEW LINCOLN Air Vantage® 566X Hydraulic (Deutz®) K4343-4
WELDER / GENERATOR / AIR COMPRESSOR / HYDRAULIC PUMP
ERIE STRAYER MP-11T Dry Batch Plant (200 yd/hr)
- 100 yd 3 Compartment Aggregate bin radial stacker fed
- 12 Yd Agg Scale
- 935 bbl split silo (Aux silo not included)
- C&W Central Dust Collector
- Water by Meter w/holding tank
- Compressor with refrigerated dryer
- Command Alkon Control System
- Still erected and operational for demonstration. We will continue to operate until it is sold.
- Ready to batch concrete now. Quick plant to get into your job site and get batching right away.
- (READY IMMEDIATELY TO BE LOADED OUT ON TRUCKS)
- CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
USED erie strayer mp-11t&C Wet & DRY BATCH PLANT
USED NORTH STAR 30 TON PER DAY CONTAINERIZEDFLAKE ICE PLANT/ ERIE STRAYER ICE BATCHER AND HOLDING HOPPER
USED erie strayer mp-11t DRY BATCH PLANT
new lincoln welder / generator / air compressor / hyd pump
USED ERIE STRAYER ICE BATCHER / NORTHSTAR FLAKE ICE PLANT
- Ice production: 30 tons per 24 hours
- Ice storage: 22 US tons
- Delivery rate: 15 US tons per hour
- Type of conveyor: Screw
- 75 cu ft ice batcher mounted in support frame. Batcher mounted from load cell scale system consisting of four load cells, load cell indicator, load cell junction box and interconnecting cables • Hydraulically operated discharge screws • Silent rotary turbine solenoid valve controlled air vibrator factory installed on batcher
- 75 cu ft ice holding hopper for field mounting on support frame • Hydraulically operated discharge screws • Silent rotary turbine solenoid valve controlled air vibrator factory installed on holding hopper • High level signal in hopper wired to junction box • Solenoid valves {Parker Valvair series), filter and regulator with gauge factory mounted on a steel support attached to the batching support frame with piping and wiring completed
- Ice Transfer Screw • 16" diameter x 11'-6" long horizontal ice transfer screw for transferring ice from the batcher discharge screw to the batch transfer conveyor • 15 HP electric motor and drive
- Ice Motor Control Panel • Ice motor control panel factory mounted on ice batcher service platform • NEMA 4 enclosure • Disconnect circuit breaker {460V-3Ph-60Hz) • Fuses and across-the-line IEC motor contactor with overload heaters for: 1 - 20 HP hydraulic power unit 1 - 15 HP ice transfer screw • Factory wiring from motor control panel to hydraulic power unit motor • Power cable with plug-in connector for ice screw
- (READY TO BE LOADED OUT ON TRUCKS)
- CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
- GENSETS AVAILABLE FOR RENT OR PURCHASE
- BATTERY CHARGER
- BATTERY DISCONNECT
- BLOCK HEATER CIRCULATING TYPE
- DUAL RACOR TYPE
- FUEL FILTER ONE PER UNIT
- FIRE EXTINGUISHER
AVAILABLE FOR ONSITE INSPECTION AND IMMEDIATE SALE/RENT
CALL OR SEND REQUEST FOR MORE INFORMATION
(877) 850-7354 / SALES@REMCONINC.COM
REMCON ASSOCIATES, LLC @ 2016
Toll Free: (877) 850-7354
Phone: (281) 360-2158
Fax: (281) 360-2168
5723 Spring Lodge Dr. Kingwood, TX 77345